Autek Logo Wide
Temperature Measurement Temperature sensor

Clamp-On temperature sensor

RTD’s can be delivered with flying leads or connection head with terminal block. Ordered with flying leads, the sensors are designed to be used with a head-mount temperature transmitter attached directly to the sensor. Standard Clamp-on comes with AISI 316 springloaded sensor with silver tip. Flat film with silicone layer as option.

Clamps to specified diameter or universal clamp-on  to be mounted with a hose clamp are both available.


Additional information

Autek contact

Jann Alnes Øverland

Senior Sales Engineer

+47 47462556


View our products


No information found...

Related products


Product ID: 0
Autek thermowells are all produced in Norway with materials and welding according to our customers specific requirements. We have a large stock with mateirals accoding to NORSOK and TR2000 requirements to support our customers with fast delivery if needed. The thermowells can be deliverd with calculations according to ASME PTC19.3 and all applicable documentation like WPS/WPQR, NDT report, PMI report, pressure test, GA drawing and wake frequency calculation. Welded thermowells can be manufactured with a full penetrated weld or partial penetration. Autek also design and produce helical strake thermowells for high velocity applications. These thermowells are based on ASME STS-1 and ASME PTC 19.3.  

Thermometers sensor pt100-pt1000

Product ID: 0
HD2107.1 and HD2107.2 are portable instruments equipped with large LCD display fitted with one input. HD2127.1 and HD2127.2 are instruments fitted with two inputs. They measure temperature by means of immersion, penetration, contact or air probes. Their sensor can be Pt100 with 3 or 4 wires, Pt1000 with 2 wires. They have centesimal resolution in the range ± 199.99°C, decimal in the rest of the range