DEKORON® Unitherm™

Dekoron Unitherm is the inventor of pre-insulated and heat traced tubing for heavy industry. They have been producing pre-insulated and heat traced tubing bundle since 1962. With over 50 years experience and in excess of 100 million feet of product installed, Dekoron Unitherm is a world leader in the design and manufacture of pre-insulated and heat traced tubing and small bore pipe. Their products have been installed on every continent and in some of the harshest environments known to man.

http://www.unithermcc.com

pre-insulated and heat traced tubing

Datasheet:

Datasheet​

Product Description Datasheet
 pre-insulated and heat traced tubing

2200 Pre-insulated

DEKORON®/Unitherm™ Series 2200 pre-insulated tubing is a thermally insulated transport line suitable for steam, gas or liquid transport. The energy-efficient design meets OSHA personnel protection requirements by limiting the jacket surface temperatures to 140ºF (60ºC) or lower at 80ºF (26ºC) ambient conditions, while transporting 400ºF (204ºC) saturated steam. 2200 series pre-insulated is used extensively in refinery and petrochemical applications to connect pipe and vessel steam tracing to steam supply manifolds. In addition, 2200 pre-insulated provides long term energy savings when used to return condensate back to the boiler. Unlike field insulated systems which are extremely difficult to seal,  2200 pre-insulted utilizes a continuous extruded polymer jacket to prevent moisture egress which is the primary cause of insulation failure.

Datasheet

4200 Pre-insulated

DEKORON®/Unitherm™ Series 4200 Aerogel pre-insulated tubing utilizes nanotechnology to provide the highest performing thermal insulation available today. Our thermally insulated transportation lines are suitable for steam, gas or liquid transport and may be designed for applications ranging from cryogenic temperatures to superheated steam. As with all DEKORON®/Unitherm™ Pre-Insulated Tubing Bundles, the Series 4200 Aerogel bundle’s energy-efficient design meets OSHA personnel protection requirements by limiting the jacket surface temperatures to 140ºF (60ºC) or lower at 80ºF (26ºC) ambient conditions, while transporting 400ºF (204ºC) saturated steam. In addition to providing superior insulation value while reducing outside diameters by as much as 50%. The proprietary insulation used in our 4200 series is hydrophobic. This feature combined with its ultra low free chloride content makes 4200 pre-insulated the ideal choice where chloride stress corrosion is of concern.

Datasheet

2210 High Temperature Pre-insulated

DEKORON®/Unitherm™ Series 2210 pre-insulated tubing is a thermally insulated transportation line suitable for high temperature steam, gas or liquid transport. The bundles are designed to maintain an average outer jacket temperature below 170ºF (77ºC) at continuous operating temperatures up to 1100ºF (593ºC). Please note that tubing sizes and materials are limited in design for applications above 700ºF. The 2210 series is used extensively in refinery, petrochemical and combined cycle power generation.  Unlike field insulated systems which are extremely difficult to seal,  2210 pre-insulted utilizes a continuous extruded polymer jacket to prevent moisture egress which is the primary cause of insulation failure.

Datasheet

2201-2204 Steam Trace

Dekoron/Unitherm Models 2201 through 2204 steam traced tubing bundles are designed to maintain fluid temperature or viscosity in process lines using saturated steam.  These products contain single or multiple metal or polymer process tubes and a metal steam tracer tube covered with a heat reflecting foil, moisture resistant, non-wicking, inorganic fibrous glass thermal insulation and a seamless weather protective outer jacket.  The tubes are cabled to provide solid contact and consistent heat transfer throughout the bundle length.  The cabled tubes are easily bent in any direction.  There is no need to twist the bundle to make a bend, a necessity with parallel-tube bundles.  The compact, energy efficient design keeps the outer jacket at or below 140°F (60°C) while transporting fluids at temperatures up to 400°F (204°C).

Datasheet
 

Instrument package

Product About Datasheet
vaerhus autek-white-background Complete hook up enclosures, preisolated tubing, heater, JB Box  –