Autek AS designs and supplies flow elements. Flow elements are a common term for differential pressure based flow meters. This is by far the most widely used method for measuring gas and fluid flow in the industry. In addition to the flow element, a complete flowmeter will consist of differential pressure transmitters and flowelemt or complete meterrun. This can be expanded with flow computer, temperature and pressure transmitter for compensation so the customer can get a mass flow result.
Autek performs calculation of the flowelemetns. The production of flow elements, venturi pipes and nozzles is carried out at our own engineering department and at SEIKO Flowcontrol, which we represent in Norway. All our deliveries to offshore meet customer requirements to comply with NORSOK, Statoil TR, GIS, DEP sepc, etc. Materials from M650 approved suppliers, welding procedures according to M601 and TR, and paint according to the M501 are all standard for our offshore deliveries.
Autek also offers calibration of flow elements. This is done either by «Hot Water» calibration or gas calibration.
Temperature sensors and thermowells are designed and calculated by Autek. The thermowells calculated and designed according to ASME PTC 19.3 – 2016, Frequency calculation and material certificate is a natural part of the delivery of all thermowells from Autek. The thermowells are manufactured from forged material or welded according to NORSOK M601 and TR1826. NDT and PMI reports are available on request.
|Venturi flowmeter||Datasheet Venturi meter_1.02|
|Restriction orifices and Critical orifices||Datasheet Restriction plates_1.01|
|Cone flowmeter||Datasheet Cone meter_1.01|
|Orifice plate, carrier and orifice flanges||Datasheet Orifice_plates_1.03|
|Flow Conditioner||Flow Conditioner|
|Venturi Calibration Services||Venturi Calibration Services|
Instrument Enclosure / Instrument Værhus
|Complete hook up enclosures||Complete hook up enclosures|